Cup Forms

Cup seals and cup arcs are available with and without brush holders, or can be installed with mounting tabs. Click here for available mounting tabs. Channel sizes include A, B, C, D, F, G, and K and are available in galvanized and stainless steels. Standard minimum cup outside diameter (OD) and standard minimum arc outside radius (OR) depends on channel size and channel material as shown below. (For cup and arc forms with K channel, contact your Sealeze Sales Representative for maximum and minimum radii). A wide range of synthetic, natural and metal filaments are available.
 

Ez-Flex Strip Brush is available as an alternative to metal back brush. It's great for use around curves and in-field installation. Click here for more information.


If your application requires a cup form with diameter and radius less than those shown, contact a Sealeze Sales Representative for more information.

To e-mail us your application information, click This email address is being protected from spambots. You need JavaScript enabled to view it. .
Or, call 1-800-787-7325

 

CUP Seals
Channel Section Size
Section
Size
(X)
Width
(inches)
(Y)
Height
(inches)
A 0.095 0.110
B 0.150 0.152
C 0.180 0.199
D 0.240 0.256
F 0.313 0.313
G 0.350 0.370
K 0.500 0.500

 

MINIMUM OD (inches) FOR CUP SEALS
Section Product Code* Galvanized Channel Stainless Channel Stainless Filament
A CFA1 1.000 1.500 1.750
B CFB1 1.250 1.750 2.500
C CFC1 1.500 2.000 3.250
D CFD1 2.000 3.000 4.000
F CFF1 2.750 3.625 4.625
G CFG1 3.000 4.000 5.000
K CFK1 10.000 12.000 15.000
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Cup Seals (pdf)
Or, click here for the On-Line Worksheet

MINIMUM OD (inches) FOR CUP SEALS with Formed Aluminum Holders
Section Product Code* Straight Flange Right-Angle Flange Angled Holders
A CFA1 4.000 6.000 On Application
B CFB1 5.000 7.000 On Application
C CFC1 6.000 8.000 On Application
D CFD1 6.500 9.000 On Application
F CFF1 On Application On Application On Application
G CFG1 10.000 12.000 On Application
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Cup Seals with Formed Aluminum Holder (pdf)
Or, click here for the On-Line Worksheet

CUP Arcs
Channel Section Size
Section
Size
(X)
Width
(inches)
(Y)
Height
(inches)
A 0.095 0.110
B 0.150 0.152
C 0.180 0.199
D 0.256 0.256
F 0.313 0.313
G 0.350 0.370
K 0.500 0.500

 

MINIMUM OR (inches) FOR CUP ARCS
Section Product Code* Galvanized Channel Stainless Channel Stainless Filament
A CAA1 0.500 0.750 1.750
B CAB1 0.625 0.875 1.250
C CAC1 0.750 1.000 1.630
D CAD1 1.000 1.500 2.000
F CAF1 1.375 1.813 2.313
G CAG1 1.500 2.000 2.500
K CAK1 5.000 6.000 7.500
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Cup Arcs (pdf)
Or, click here for the On-Line Worksheet

MINIMUM OR (inches) FOR CUP ARCS with Formed Aluminum Holders
Section Product Code* Straight Flange Right-Angle Flange Angled Holders
A CAA1 2.000 3.000 On Application
B CAB1 2.500 3.500 On Application
C CAC1 3.000 4.000 On Application
D CAD1 3.250 4.500 On Application
F CAF1 On Application On Application On Application
G CAG1 6.000 6.000 On Application
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Cup Arcs with Formed Aluminum Holder (pdf)
Or, click here for the On-Line Worksheet

 

Cup seals and cup arcs are available with and without brush holders, or can be installed with mounting tabs. Click here for available mounting tabs. Channel sizes include A, B, C, D, F, G, and K and are available in galvanized and stainless steels. Standard minimum cup outside diameter (OD) and standard minimum arc outside radius (OR) depends on channel size and channel material as shown below. (For cup and arc forms with K channel, contact your Sealeze Sales Representative for maximum and minimum radii). A wide range of synthetic, natural and metal filaments are available.
 

Ez-Flex Strip Brush is available as an alternative to metal back brush. It's great for use around curves and in-field installation. Click here for more information.


If your application requires a cup form with diameter and radius less than those shown, contact a Sealeze Sales Representative for more information.

To e-mail us your application information, click This email address is being protected from spambots. You need JavaScript enabled to view it..
Or, call 1-800-787-7325

 

CUP Seals
Channel Section Size
Section
Size
(X)
Width
(inches)
(Y)
Height
(inches)
A 0.095 0.110
B 0.150 0.152
C 0.180 0.199
D 0.240 0.256
F 0.313 0.313
G 0.350 0.370
K 0.500 0.500

 

MINIMUM OD (inches) FOR CUP SEALS
Section Product Code* Galvanized Channel Stainless Channel Stainless Filament
A CFA1 1.000 1.500 1.750
B CFB1 1.250 1.750 2.500
C CFC1 1.500 2.000 3.250
D CFD1 2.000 3.000 4.000
F CFF1 2.750 3.625 4.625
G CFG1 3.000 4.000 5.000
K CFK1 10.000 12.000 15.000
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Cup Seals (pdf)
Or, click here for the On-Line Worksheet

MINIMUM OD (inches) FOR CUP SEALS with Formed Aluminum Holders
Section Product Code* Straight Flange Right-Angle Flange Angled Holders
A CFA1 4.000 6.000 On Application
B CFB1 5.000 7.000 On Application
C CFC1 6.000 8.000 On Application
D CFD1 6.500 9.000 On Application
F CFF1 On Application On Application On Application
G CFG1 10.000 12.000 On Application
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Cup Seals with Formed Aluminum Holder (pdf)
Or, click here for the On-Line Worksheet

CUP Arcs
Channel Section Size
Section
Size
(X)
Width
(inches)
(Y)
Height
(inches)
A 0.095 0.110
B 0.150 0.152
C 0.180 0.199
D 0.256 0.256
F 0.313 0.313
G 0.350 0.370
K 0.500 0.500

 

MINIMUM OR (inches) FOR CUP ARCS
Section Product Code* Galvanized Channel Stainless Channel Stainless Filament
A CAA1 0.500 0.750 1.750
B CAB1 0.625 0.875 1.250
C CAC1 0.750 1.000 1.630
D CAD1 1.000 1.500 2.000
F CAF1 1.375 1.813 2.313
G CAG1 1.500 2.000 2.500
K CAK1 5.000 6.000 7.500
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Cup Arcs (pdf)
Or, click here for the On-Line Worksheet

MINIMUM OR (inches) FOR CUP ARCS with Formed Aluminum Holders
Section Product Code* Straight Flange Right-Angle Flange Angled Holders
A CAA1 2.000 3.000 On Application
B CAB1 2.500 3.500 On Application
C CAC1 3.000 4.000 On Application
D CAD1 3.250 4.500 On Application
F CAF1 On Application On Application On Application
G CAG1 6.000 6.000 On Application
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Cup Arcs with Formed Aluminum Holder (pdf)
Or, click here for the On-Line Worksheet

 

Cup seals and cup arcs are available with and without brush holders, or can be installed with mounting tabs. Click here for available mounting tabs. Channel sizes include A, B, C, D, F, G, and K and are available in galvanized and stainless steels. Standard minimum cup outside diameter (OD) and standard minimum arc outside radius (OR) depends on channel size and channel material as shown below. (For cup and arc forms with K channel, contact your Sealeze Sales Representative for maximum and minimum radii). A wide range of synthetic, natural and metal filaments are available.
 

Ez-Flex Strip Brush is available as an alternative to metal back brush. It's great for use around curves and in-field installation. Click here for more information.


If your application requires a cup form with diameter and radius less than those shown, contact a Sealeze Sales Representative for more information.

To e-mail us your application information, click This email address is being protected from spambots. You need JavaScript enabled to view it..
Or, call 1-800-787-7325

 

CUP Seals
Channel Section Size
Section
Size
(X)
Width
(inches)
(Y)
Height
(inches)
A 0.095 0.110
B 0.150 0.152
C 0.180 0.199
D 0.240 0.256
F 0.313 0.313
G 0.350 0.370
K 0.500 0.500

 

MINIMUM OD (inches) FOR CUP SEALS
Section Product Code* Galvanized Channel Stainless Channel Stainless Filament
A CFA1 1.000 1.500 1.750
B CFB1 1.250 1.750 2.500
C CFC1 1.500 2.000 3.250
D CFD1 2.000 3.000 4.000
F CFF1 2.750 3.625 4.625
G CFG1 3.000 4.000 5.000
K CFK1 10.000 12.000 15.000
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Cup Seals (pdf)
Or, click here for the On-Line Worksheet

MINIMUM OD (inches) FOR CUP SEALS with Formed Aluminum Holders
Section Product Code* Straight Flange Right-Angle Flange Angled Holders
A CFA1 4.000 6.000 On Application
B CFB1 5.000 7.000 On Application
C CFC1 6.000 8.000 On Application
D CFD1 6.500 9.000 On Application
F CFF1 On Application On Application On Application
G CFG1 10.000 12.000 On Application
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Cup Seals with Formed Aluminum Holder (pdf)
Or, click here for the On-Line Worksheet

CUP Arcs
Channel Section Size
Section
Size
(X)
Width
(inches)
(Y)
Height
(inches)
A 0.095 0.110
B 0.150 0.152
C 0.180 0.199
D 0.256 0.256
F 0.313 0.313
G 0.350 0.370
K 0.500 0.500

 

MINIMUM OR (inches) FOR CUP ARCS
Section Product Code* Galvanized Channel Stainless Channel Stainless Filament
A CAA1 0.500 0.750 1.750
B CAB1 0.625 0.875 1.250
C CAC1 0.750 1.000 1.630
D CAD1 1.000 1.500 2.000
F CAF1 1.375 1.813 2.313
G CAG1 1.500 2.000 2.500
K CAK1 5.000 6.000 7.500
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Cup Arcs (pdf)
Or, click here for the On-Line Worksheet

MINIMUM OR (inches) FOR CUP ARCS with Formed Aluminum Holders
Section Product Code* Straight Flange Right-Angle Flange Angled Holders
A CAA1 2.000 3.000 On Application
B CAB1 2.500 3.500 On Application
C CAC1 3.000 4.000 On Application
D CAD1 3.250 4.500 On Application
F CAF1 On Application On Application On Application
G CAG1 6.000 6.000 On Application
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Cup Arcs with Formed Aluminum Holder (pdf)
Or, click here for the On-Line Worksheet

 

logos