Inverted and external coils are available in a wide range of synthetic, natural and metal filaments, with and without brush holders, or can be installed with mounting tabs. Click here for available mounting tabs. Channel sizes include A, B, C, D, F, G and K and are available in galvanized and stainless steels. Minimum outside diameter (OD) and inside diameter (ID) depend on channel size and channel material as shown below.

Ez-Flex Strip Brush is available as an alternative to metal back brush. It's great for use around curves and in-field installation. Click here for more information.

If your application requires a coil form with diameter and radius less than those shown, contact a SEALEZE® Sales Representative for more information.

To email us your application information, click here. Or, call 1-800-787-7325

 

Inverted Coil

Channel Section Size
Section
Size
(X)
Width
(inches)
(Y)
Height
(inches)
A 0.095 0.110
B 0.150 0.152
C 0.180 0.199
D 0.240 0.256
F 0.313 0.313
G 0.350 0.370
K 0.500 0.500
MINIMUM OD (inches) FOR INVERTED COILS
SectionProduct Code*Galvanized ChannelStainless ChannelStainless Filament
A ICA1 0.625 1.000 1.250
B ICB1 1.312 2.500 2.500
C ICC1 2.187 3.750 4.250
D ICD1 2.850 4.250 4.750
F ICF1 3.500 5.250 5.750
G ICG1 4.000 6.000 6.500
K ICK1 8.000 10.000 14.000
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Inverted Coil (pdf)
Or, click here for the online worksheet

Inverted Coil with Aluminum Holder

Channel Section Size
Section
Size
(X)
Width
(inches)
(Y)
Height
(inches)
A 0.095 0.110
B 0.150 0.152
C 0.180 0.199
D 0.256 0.256
F 0.313 0.313
G 0.350 0.370
K 0.500 0.500

 

MINIMUM OD (inches) FOR INVERTED COIL with Aluminum Holders (Split-Ring Shaft Seal)
SectionProduct Code*Straight Flange
(2-piece holder)
Right-Angle Flange
(4-piece holder)
Angled Holders
A ICA1 5.000 4.000 On Application
B ICB1 6.000 5.000 On Application
C ICC1 7.000 6.000 On Application
D ICD1 7.500 6.500 On Application
F ICF1 On Application On Application On Application
G ICG1 10.000 8.000 On Application
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Inverted Coil with Aluminum Holder (pdf)
Or, click here for the online worksheet

Inverted Coil with Machined Retaining Ring

Channel Section Size
Section
Size
(X)
Width
(inches)
(Y)
Height
(inches)
A 0.095 0.110
B 0.150 0.152
C 0.180 0.199
D 0.256 0.256
F 0.313 0.313
G 0.350 0.370
K 0.500 0.500

Inverted coils can be mounted in machined retaining rings. Minimum coil diameters, for the brush itself, are shown below. Retaining rings can be manufactured to meet your requirements for outside diameter, thickness of ring material and the position, size and number of mounting holes.

MINIMUM OD (inches) FOR INVERTED COILS
SectionProduct Code*Galvanized ChannelStainless ChannelStainless Filament
A ICA1 0.625 1.000 On Application
B ICB1 1.312 2.500 2.500
C ICC1 2.187 3.750 4.250
D ICD1 2.850 4.250 4.750
F ICF1 3.500 5.250 5.750
G ICG1 4.000 6.000 6.500
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Inverted Coil with Machined Retaining Ring (pdf)
Or, click here for the online worksheet

External Coil

Channel Section Size
Section
Size
(X)
Width
(inches)
(Y)
Height
(inches)
A 0.095 0.110
B 0.150 0.152
C 0.180 0.199
D 0.256 0.256
F 0.313 0.313
G 0.350 0.370
K 0.500 0.500
MINIMUM ID (inches) FOR EXTERNAL COILS
SectionProduct Code*Galvanized ChannelStainless ChannelStainless Filament
A ECA1 0.750 1.500 2.000
B ECB1 1.000 2.000 2.000
C ECC1 1.250 2.250 2.750
D ECD1 1.500 2.500 3.000
F ECF1 1.800 2.800 3.300
G ECG1 2.000 3.000 3.500
K ECK1 4.000 5.500 7.000
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for External Coils (pdf)
Or, click here for the online worksheet

logos