Arc Forms


Inverted arcs (filaments pointed inward) and external arcs (filaments pointed out) are available with and without brush holders. Channel sizes include A, B, C, D, F, G and K and are available in galvanized and stainless steels. Minimum arc outside radius (OR) or inside radius (IR) depends on channel size and channel material as shown below. A wide range of synthetic, natural and metal filaments are available.

Ez-Flex Strip Brush is available as an alternative to metal back brush. It's great for use around curves and in-field installation. Click here for more information.

If your application requires an arc form with diameter and radius less than those shown,
contact a Sealeze Sales Representative for more information.

To e-mail us your application information,
This email address is being protected from spambots. You need JavaScript enabled to view it..
Or, call 1-800-787-7325 or 1-804-743-0982

 

Inverted Arcs

Channel Section Size
Section
Size
(X)
Width
(inches)
(Y)
Height
(inches)
A 0.095 0.110
B 0.150 0.152
C 0.180 0.199
D 0.240 0.256
F 0.313 0.313
G 0.350 0.370
K 0.500 0.500

 

MINIMUM OR (inches) FOR INVERTED ARCS
Section Product Code* Galvanized Channel Stainless Channel Stainless Filament
A IAA1 0.313 0.500 On Application
B IAB1 0.656 1.250 1.250
C IAC1 1.094 1.875 2.125
D IAD1 1.425 2.125 2.375
F IAF1 1.750 2.625 2.875
G IAG1 2.000 3.000 3.250
K IAK1 4.000 5.000 7.000
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Inverted Arc (pdf)
Or, click here for the On-Line Worksheet

MINIMUM OR (inches) FOR INVERTED ARCS with Formed Aluminum Holders
Section Product Code* Straight Flange Right-Angle Flange Angled Holders
A IAA1 2.500 2.000 On Application
B IAB1 3.000 2.500 On Application
C IAC1 3.500 3.000 On Application
D IAD1 3.750 3.250 On Application
F IAF1 On Application On Application On Application
G IAG1 5.000 4.000 On Application
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Inverted Arc with Formed Aluminum Holder (pdf)
Or, click here for the On-Line Worksheet
 

External Arcs

Channel Section Size
Section
Size
(X)
Width
(inches)
(Y)
Height
(inches)
A 0.095 0.110
B 0.150 0.152
C 0.180 0.199
D 0.256 0.256
F 0.313 0.313
G 0.350 0.370
K 0.500 0.500

 

MINIMUM IR (inches) FOR EXTERNAL ARCS
Section Product Code* Galvanized Channel Stainless Channel Stainless Filament
A EAA1 0.375 0.750 On Application
B EAB1 0.500 1.000 1.000
C EAC1 0.625 1.125 1.375
D EAD1 0.750 1.250 1.500
F EAF1 0.900 1.400 1.650
G EAG1 1.000 1.500 1.750
K EAK1 2.000 2.750 3.500
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for External Arc (pdf)
Or, click here for the On-Line Worksheet

MINIMUM OR (inches) FOR Inverted/External Arc ASSEMBLIES with Formed Aluminum Holders
Section Product Code* Straight Flange Right-Angle Flange Angled Holders
A IAA1 2.500 2.000 On Application
B IAB1 3.000 2.500 On Application
C IAC1 3.500 3.000 On Application
D IAD1 3.750 3.250 On Application
F IAF1 On Application On Application On Application
G IAG1 5.000 4.000 On Application
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Inverted/External Arc Assemblies (pdf)
Or, click here for the On-Line Worksheet
 

logos