LEVER Seals

Lever seals are available in a variety of filaments and can be constructed in channel and clip materials to meet your needs. They can be made to almost any length and width.

Stock Lever Seals

Channel Section Size
Section
Size
(X)
Width
(inches)
(Y)
Height
(inches)
A 0.095 0.110
B 0.150 0.152
C 0.180 0.199
D 0.240 0.256
F 0.313 0.313
G 0.350 0.370

Lever seals in lengths (A) up to 10 feet can be assembled from T-304 Stainless steel clips and stock nylon brush in standard OATs. The following configurations are available with 10-day lead-time, or less:

STANDARD LEVER SEALS ASSEMBLIES
Product No.Description
LSB103BC T-304 stainlesss steel clips (2); SFB103BC stock nylon brush (cut to length "A") with 0.500 OAT, nylon black crimped filament, galvanized steel channel.
LSC110BC T-304 stainlesss steel clips (2); SFC110BC stock nylon brush (cut to length "A") with 1.20" OAT, nylon black crimped filament, galvanized steel channel.
LSD112BC T-304 stainlesss steel clips (2); SFD112BC stock nylon brush (cut to length "A") with 1.50" OAT, nylon black crimped filament, galvanized steel channel.

 

Stock T-304 Stainless Steel Clip Specifications for Lever Seals
Fits Brush ChannelLengthWidthHole DiameterHole Spacing
B 1.06" .316" .138" .340"
C 2.46" .315" .138" .807"
D 3.06" .500" .190" 1.236"


Click here to download a worksheet for Lever Seals (pdf) Or, click here for the On-Line Worksheet

Custom Lever Seals

Custom Lever Seal Materials
CHANNELFILAMENTCLIP
Stainless Steel - T-304
Galvenized Steel
Nylon
Polypropylene
Ployester
Horsehair
Tampico
Stainless Steel - T-304
Mild Steel

Other S/S available on request.

Channel Section Size
Section
Size
(X)
Width
(inches)
(Y)
Height
(inches)
A 0.095 0.110
B 0.150 0.152
C 0.180 0.199
D 0.240 0.256
F 0.313 0.313
G 0.350 0.370

Click here to download a worksheet for Custom Lever Seals (pdf)
Or, click here for the On-Line Worksheet

Lever Seals of almost any length

Long lever seals can be configured using Sealeze stock nylon brushes mounted brush holders. Brushes with holders are mounted in parallel with the ends of the filaments just touching. With brush holders, end clips are not necessary. Holders can be provided with mounting holes to meet your specifications. Click here for mounting hole options.

If your application requires lever seals with special materials, shapes or sizes, contact a Sealeze Sales Representative for more information.

 

To e-mail us your application information, This email address is being protected from spambots. You need JavaScript enabled to view it.. Or, call 1-800-787-7325

logos