 |
 |
 |
 |
| |
White Paper: Sealeze Static-Dissipation
Brush in a Web Application.
Click here
to learn how Sealeze Static Seal Static-Dissipation
Brush SSG515AT2D performed in one company’s
web coater application. |
|
 |
|
 |
|
Sealeze
product line of brushes for static control includes:
- Static
Seal brushes with static-dissipative and anti-static filaments
- Soft-Fiber
static-dissipative brush with acrylic fiber
- Metal
filament brush with conductive filaments
Static
Seal
Sealeze Static Seal brushes are designed for applications
requiring electrical conductivity, static dissipation, or
EMI shielding properties.
Static
Seal Static-Dissipative Nylon Filament Brushes are made
with carbon particles chemically bonded to nylon filaments,
to provide a brush with excellent strength and flexibility
that will not crack or flake in working temperatures up to
230 degrees F. (These brushes are not recommended for use
with un-encapsulated electronic microcircuits.) Static Seal
Static-Dissipative brushes are available in mixtures of 20%
or 100% conductive filament to meet your application needs.
Sealeze Static Seal conductive filaments have an electrical
resistance of 20,000 ohms per inch (depending upon filament
diameter) for excellent electrical conductivity and static-dissipative
characteristics.
Click
here for Data Sheet on stock brush SFB115BL100CF with
100% conductive nylon filament; click
here for Data Sheet on stock brush SFB115BL20CF with mix
of 20% conductive nylon filament.
Static Seal Anti-Static Nylon Filament Brushes are made
with nylon filaments that are permanently infused throughout
with a conductive agent that does not affect the mechanical
or physical properties of the filament. Because it is infused
within the filament, flaking or cracking cannot occur. Surface
resistivity is 1 X 109 ohms. Properly grounded,
these brushes can be used in applications where static generation
is not desired.
Click
here for Data Sheet on anti-static stock brush SFB110AS.
Soft-Fiber
Sealeze Soft-Fiber, static-dissipative brushes are designed
for applications requiring the gentlest touch. Made from Thunderon®
fiber, these brushes can be installed in any Sealeze size
G aluminum or mild steel brush holders. Thunderon is an acrylic
fiber that has been chemically bonded with a layer of copper
sulfide to produce a resistance of 3 to 5 times 10-4
ohms per centimeter. This outer layer becomes a part of the
host fiber and will not flake or crack. These brushes are
manufactured with tufts spaced 0.25 or 0.50 inches apart with
exposed fiber length of 1.50 inches. We can trim to shorter
fiber lengths to meet your needs.
Click
here for Data Sheet on static dissipation stock brush
SSG515AT1D.
Click
here for Data Sheet on static dissipation stock brush
SSG515AT2D.
 |
| Sealeze
Metal Filament brushes,
when properly grounded, provide a conductive path
between the charged surface and ground. These brushes
can be used to dissipate static charges in extreme
high-temperature applications. |
|
 |
|
|
Metal
Filament
Metal Filament brushes are used to dissipate static charges
in applications where brush properties, such as high-abrasion
or resistance to elevated temperatures, are required. Click
here for Sealeze Metal Filament Brushes
For
maximum effectiveness, static dissipation brushes must be
properly installed and grounded. Ask your Sealeze Sales Representative
for installation and grounding information.
To
e-mail us your application information, click here.
Or, call 1-800-787-7325 or 1-804-743-0982 |
|
