| Spiral
Type (Inverted, External, External with Mandrel): |
|
| For
Inverted and External Spiral (refer to Inverted
or External Spiral Worksheet) |
Outside
Diameter (A):
|
|
Inside
Diameter (B):
|
|
Brush
Face Length (C):
|
|
Filament
Material:
|
|
Filament
Diameter:
|
|
Channel
Size (A (except for metal filament), B, C, D,
F, G or K):
|
|
Density
(light, medium, heavy):
|
|
Stiffness
(soft, medium, stiff):
|
|
| Channel
Material (Galvanized, T-304S/S, T-316L S/S): |
|
Pitch
(tight-wound or center to center dimension):
|
|
| Right-Hand
or Left-Hand Wound: |
|
| For
External Spiral with Mandrel (refer to External
Spiral Worksheet) |
| The
following information is required for the mandrel: |
Mandrel
Type (solid or tubular):
|
|
Mandrel
OD (B2):
|
|
| Mandrel
ID, if tubular (B3): |
|
Keyway
Dimensions (C2):
|
|
Distance
from end of mandrel to keyway center:
|
|
Keyway
Threaded (yes, no):
|
|
| Type
and Size of Threads: |
|
Secure
Brush (weld, clip, other):
|
|
Mandrel
Length:
|
|
Brush
Centered on Mandrel (yes, no – if no, specify):
|
|
| Special
Tolerances and notes: |
|
|
Quantity
Required:
|
|
| Annual
Usage: |
|
|
