Mounting Tabs for Metal-Backed Strip Brush Inverted Coils and Cup Seals

Mounting tabs are ideal for mounting inverted coils and cup seals when formed holders are not possible. Sealeze aluminum brush holders are cut into tab lengths of 0.5 or 0.375 inches and are available with or without mounting holes. Straight, angled, and right angle flange tabs are available for each channel size as shown in the following table.

For assistance in selecting the mounting configuration for your application, contact a Sealeze Sales Representative. 

To e-mail us your application information, click here. Or, call 1-800-787-7325 or 1-804-743-0982

Section	Straight Flange
	X	A	B	C	D
A	180°	0.040	0.446	0.212	0.197
B	180°	0.062	0.427	0.264	0.267
B	180°	0.062	0.735	0.265	0.262
C	180°	0.050	0.439	.0311	0.292
C	180°	0.050	0.750	0.311	0.292
C	180°	0.050	1.500	0.311	0.292
C	180°	0.055	3.000	0.311	0.292
D	180°	0.062	0.711	0.391	0.366
D	180°	0.062	3.00	0.391	0.366
F	180°	0.062	1.000	0.474	0.469
F	180°	0.062	1.500	0.474	0.469
G	180°	0.062	0.784	0.528	0.505
G	180°	0.062	1.472	0.528	0.505
G	180°	0.079	4.894	0.576	0.539

Section	Right Angled Flange
	X	A	B	C	D
A	90°	0.056	0.347	0.204	0.220
B	90°	0.055	0.423	0.266	0.264
B	90°	0.055	1.250	0.266	0.264
C	90°	0.060	0.663	0.303	0.331
D	90°	0.062	0.697	0.365	0.391
F	90°	0.062	1.000	0.469	0.474
G	90°	0.062	0.873	0.505	0.528

Section	Angled Flange
	X	A	B	C	D
A	40°	0.040	0.375	0.212	0.197
A	40°	0.062	0.750	0.225	0.213
B	15°	0.062	0.768	0.265	0.262
B	30°	0.062	0.862	0.265	0.262
C	45°	0.050	1.250	0.311	0.292
D	45°	0.062	0.844	0.391	0.366
D	45°	0.062	1.890	0.391	0.366
D	45°	0.062	1.000	0.391	0.366
F	45°	0.062	1.500	0.469	0.474
G	45°	0.062	1.000	0.528	0.505

Click here to download a worksheet for Mounting Tabs (pdf)