Inverted and external brush arcs for industrial applications.

Arc Forms

Inverted arcs (filaments pointed inward) and external arcs (filaments pointed out) are available with and without brush holders. Channel sizes include A, B, C, D, F, G and K and are available in galvanized and stainless steels. Minimum arc outside radius (OR) or inside radius (IR) depends on channel size and channel material as shown below. A wide range of synthetic, natural and metal filaments are available.


	Ez-Flex Strip Brush is available as an alternative to metal back brush. It's great for use around curves and in-field installation. Click here for more information.

If your application requires an arc form with diameter and radius less than those shown,
contact a Sealeze Sales Representative for more information.

To e-mail us your application information, click here.
Or, call 1-800-787-7325 or 1-804-743-0982

Inverted
Arcs

Channel Section Size
Section Size	(X) Width (inches)	(Y) Height (inches)
A	0.095	0.110
B	0.150	0.152
C	0.180	0.199
D	0.240	0.256
F	0.313	0.313
G	0.350	0.370
K	0.500	0.500

MINIMUM OR (inches) FOR INVERTED ARCS
Section	Product Code*	Galvanized Channel	Stainless Channel	Stainless Filament
A	IAA1	0.313	0.500	On Application
B	IAB1	0.656	1.250	1.250
C	IAC1	1.094	1.875	2.125
D	IAD1	1.425	2.125	2.375
F	IAF1	1.750	2.625	2.875
G	IAG1	2.000	3.000	3.250
K	IAK1	4.000	5.000	7.000
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Inverted Arc (pdf)
Or, click here for the On-Line Worksheet

MINIMUM OR (inches) FOR INVERTED ARCS with Formed Aluminum Holders
Section	Product Code*	Straight Flange	Right-Angle Flange	Angled Holders
A	IAA1	2.500	2.000	On Application
B	IAB1	3.000	2.500	On Application
C	IAC1	3.500	3.000	On Application
D	IAD1	3.750	3.250	On Application
F	IAF1	On Application	On Application	On Application
G	IAG1	5.000	4.000	On Application
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Inverted Arc with Formed Aluminum Holder (pdf)
Or, click here for the On-Line Worksheet

External Arcs

Channel Section Size
Section Size	(X) Width (inches)	(Y) Height (inches)
A	0.095	0.110
B	0.150	0.152
C	0.180	0.199
D	0.256	0.256
F	0.313	0.313
G	0.350	0.370
K	0.500	0.500

MINIMUM IR (inches) FOR EXTERNAL ARCS
Section	Product Code*	Galvanized Channel	Stainless Channel	Stainless Filament
A	EAA1	0.375	0.750	On Application
B	EAB1	0.500	1.000	1.000
C	EAC1	0.625	1.125	1.375
D	EAD1	0.750	1.250	1.500
F	EAF1	0.900	1.400	1.650
G	EAG1	1.000	1.500	1.750
K	EAK1	2.000	2.750	3.500
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for External Arc (pdf)
Or, click here for the On-Line Worksheet

MINIMUM OR (inches) FOR Inverted/External Arc ASSEMBLIES with Formed Aluminum Holders
Section	Product Code*	Straight Flange	Right-Angle Flange	Angled Holders
A	IAA1	2.500	2.000	On Application
B	IAB1	3.000	2.500	On Application
C	IAC1	3.500	3.000	On Application
D	IAD1	3.750	3.250	On Application
F	IAF1	On Application	On Application	On Application
G	IAG1	5.000	4.000	On Application
*T-304 S/S Channel change "1" to "2". T-316L Channel change "1" to "6".

Click here to download a worksheet for Inverted/External Arc Assemblies (pdf)
Or, click here for the On-Line Worksheet

Arc Forms

INDUSTRIAL

WEATHERSEAL