|
|
|
Cup seals and cup arcs are available with and without brush
holders, or can be installed with mounting tabs. Click here
for available mounting tabs. Channel sizes include A, B, C,
D, F, G, and K and are available in galvanized and stainless
steels. Standard minimum cup outside diameter (OD) and standard
minimum arc outside radius (OR) depends on channel size and
channel material as shown below. (For cup and arc forms with
K channel, contact your Sealeze Sales Representative for maximum
and minimum radii). A wide range of synthetic, natural and metal
filaments are available.
 |
 |
 |
| |
Ez-Flex
Strip Brush is available as an alternative to
metal back brush. It's great for use around curves
and in-field installation. Click
here for more information. |
|
 |
|
 |
If your application requires a cup form with diameter and radius
less than those shown, contact a Sealeze Sales Representative
for more information.
To
e-mail us your application information, click here.
Or, call 1-800-787-7325 or 1-804-743-0982 |
|
| CUP
Seals |
 |
| Channel
Section Size |
Section
Size |
(X)
Width
(inches) |
(Y)
Height
(inches) |
 |
| A |
0.095 |
0.110 |
| B |
0.150 |
0.152 |
| C |
0.180 |
0.199 |
| D |
0.240 |
0.256 |
| F |
0.313 |
0.313 |
| G |
0.350 |
0.370 |
| K |
0.500 |
0.500 |
|
| MINIMUM
OD (inches) FOR CUP SEALS |
| Section |
Product
Code* |
Galvanized
Channel |
Stainless
Channel |
Stainless
Filament |
| A |
CFA1 |
1.000 |
1.500 |
1.750 |
| B |
CFB1 |
1.250 |
1.750 |
2.500 |
| C |
CFC1 |
1.500 |
2.000 |
3.250 |
| D |
CFD1 |
2.000 |
3.000 |
4.000 |
| F |
CFF1 |
2.750 |
3.625 |
4.625 |
| G |
CFG1 |
3.000 |
4.000 |
5.000 |
| K |
CFK1 |
10.000 |
12.000 |
15.000 |
| *T-304
S/S Channel change "1" to "2". T-316L
Channel change "1" to "6". |
Click here to download a worksheet for Cup Seals (pdf)
Or, click here for the On-Line Worksheet
| MINIMUM
OD (inches) FOR CUP SEALS with Formed Aluminum Holders |
| Section |
Product
Code* |
Straight
Flange |
Right-Angle
Flange |
Angled
Holders |
| A |
CFA1 |
4.000 |
6.000 |
On
Application |
| B |
CFB1 |
5.000 |
7.000 |
On
Application |
| C |
CFC1 |
6.000 |
8.000 |
On
Application |
| D |
CFD1 |
6.500 |
9.000 |
On
Application |
| F |
CFF1 |
On
Application |
On
Application |
On
Application |
| G |
CFG1 |
10.000 |
12.000 |
On
Application |
| *T-304
S/S Channel change "1" to "2". T-316L
Channel change "1" to "6". |
Click here to
download a worksheet for Cup Seals with Formed Aluminum Holder
(pdf)
Or, click here for the On-Line Worksheet |
| CUP
Arcs |
 |
| Channel
Section Size |
Section
Size |
(X)
Width
(inches) |
(Y)
Height
(inches) |
|
| A |
0.095 |
0.110 |
| B |
0.150 |
0.152 |
| C |
0.180 |
0.199 |
| D |
0.256 |
0.256 |
| F |
0.313 |
0.313 |
| G |
0.350 |
0.370 |
| K |
0.500 |
0.500 |
|
| MINIMUM
OR (inches) FOR CUP ARCS |
| Section |
Product
Code* |
Galvanized
Channel |
Stainless
Channel |
Stainless
Filament |
| A |
CAA1 |
0.500 |
0.750 |
1.750 |
| B |
CAB1 |
0.625 |
0.875 |
1.250 |
| C |
CAC1 |
0.750 |
1.000 |
1.630 |
| D |
CAD1 |
1.000 |
1.500 |
2.000 |
| F |
CAF1 |
1.375 |
1.813 |
2.313 |
| G |
CAG1 |
1.500 |
2.000 |
2.500 |
| K |
CAK1 |
5.000 |
6.000 |
7.500 |
| *T-304
S/S Channel change "1" to "2". T-316L
Channel change "1" to "6". |
Click here to
download a worksheet for Cup Seals (pdf)
Or, click here for the On-Line Worksheet
| MINIMUM
OR (inches) FOR CUP ARCS with Formed Aluminum Holders |
| Section |
Product
Code* |
Straight
Flange |
Right-Angle
Flange |
Angled
Holders |
| A |
CAA1 |
2.000 |
3.000 |
On
Application |
| B |
CAB1 |
2.500 |
3.500 |
On
Application |
| C |
CAC1 |
3.000 |
4.000 |
On
Application |
| D |
CAD1 |
3.250 |
4.500 |
On
Application |
| F |
CAF1 |
On
Application |
On
Application |
On
Application |
| G |
CAG1 |
6.000 |
6.000 |
On
Application |
| *T-304
S/S Channel change "1" to "2". T-316L
Channel change "1" to "6". |
Click here to
download a worksheet for Cup Arcs with Formed Aluminum Holder
(pdf)
Or, click here for the On-Line Worksheet |
| |
|
