|
COIL
Brush Forms for Metal-Backed strip brush - Previous
Page |
Inverted and external coils are available in a wide range of
synthetic, natural and metal filaments, with and without brush
holders, or can be installed with mounting tabs. Click here
for available mounting tabs. Channel sizes include A, B, C,
D, F, G and K and are available in galvanized and stainless
steels. Minimum outside diameter (OD) and inside diameter (ID)
depend on channel size and channel material as shown below.
If your application requires a coil form with diameter and radius
less than those shown, contact a Sealeze Sales Representative
for more information.
 |
 |
 |
| |
Ez-Flex
Strip Brush is available as an alternative to
metal back brush. It's great for use around curves
and in-field installation. Click
here for more information. |
|
 |
|
 |
To
e-mail us your application information, click here.
Or, call 1-800-787-7325 or 1-804-743-0982
|
|
| Inverted
Coil |
 |
| Channel
Section Size |
Section
Size |
(X)
Width
(inches) |
(Y)
Height
(inches) |
 |
| A |
0.095 |
0.110 |
| B |
0.150 |
0.152 |
| C |
0.180 |
0.199 |
| D |
0.256 |
0.256 |
| F |
0.313 |
0.313 |
| G |
0.350 |
0.370 |
| K |
0.500 |
0.500 |
|
| MINIMUM
OD (inches) FOR INVERTED COILS |
| Section |
Product
Code* |
Galvanized
Channel |
Stainless
Channel |
Stainless
Filament |
| A |
ICA1 |
0.625 |
1.000 |
1.250 |
| B |
ICB1 |
1.312 |
2.500 |
2.500 |
| C |
ICC1 |
2.187 |
3.750 |
4.250 |
| D |
ICD1 |
2.850 |
4.250 |
4.750 |
| F |
ICF1 |
3.500 |
5.250 |
5.750 |
| G |
ICG1 |
4.000 |
6.000 |
6.500 |
| K |
ICK1 |
8.000 |
10.000 |
14.000 |
| *T-304
S/S Channel change "1" to "2". T-316L
Channel change "1" to "6". |
Click here to
download a worksheet for Inverted Coil (pdf)
Or, click here for the On-Line Worksheet
Inverted
Coil
with Aluminum
Holder
|
 |
| Channel
Section Size |
Section
Size |
(X)
Width
(inches) |
(Y)
Height
(inches) |
|
| A |
0.095 |
0.110 |
| B |
0.150 |
0.152 |
| C |
0.180 |
0.199 |
| D |
0.256 |
0.256 |
| F |
0.313 |
0.313 |
| G |
0.350 |
0.370 |
| K |
0.500 |
0.500 |
|
| MINIMUM
OD (inches) FOR INVERTED COIL with Aluminum Holders (Split-Ring
Shaft Seal) |
| Section |
Product
Code* |
Straight
Flange
(2-piece holder) |
Right-Angle
Flange
(4-piece holder) |
Angled
Holders |
| A |
ICA1 |
5.000 |
4.000 |
On
Application |
| B |
ICB1 |
6.000 |
5.000 |
On
Application |
| C |
ICC1 |
7.000 |
6.000 |
On
Application |
| D |
ICD1 |
7.500 |
6.500 |
On
Application |
| F |
ICF1 |
On
Application |
On
Application |
On
Application |
| G |
ICG1 |
10.000 |
8.000 |
On
Application |
| *T-304
S/S Channel change "1" to "2". T-316L
Channel change "1" to "6". |
Click here
to download a worksheet for Inverted Coil with Aluminum Holder
(pdf)
Or, click here for the On-Line Worksheet
|
Inverted
Coil
with Machined
Retaining Ring
|
 |
| Channel
Section Size |
Section
Size |
(X)
Width
(inches) |
(Y)
Height
(inches) |
|
| A |
0.095 |
0.110 |
| B |
0.150 |
0.152 |
| C |
0.180 |
0.199 |
| D |
0.256 |
0.256 |
| F |
0.313 |
0.313 |
| G |
0.350 |
0.370 |
| K |
0.500 |
0.500 |
|
Inverted coils can be mounted in machined retaining rings.
Minimum coil diameters, for the brush itself, are shown below.
Retaining rings can be manufactured to meet your requirements
for outside diameter, thickness of ring material and the position,
size and number of mounting holes.
| MINIMUM
OD (inches) FOR INVERTED COILS |
| Section |
Product
Code* |
Galvanized
Channel |
Stainless
Channel |
Stainless
Filament |
| A |
ICA1 |
0.625 |
1.000 |
On
Application |
| B |
ICB1 |
1.312 |
2.500 |
2.500 |
| C |
ICC1 |
2.187 |
3.750 |
4.250 |
| D |
ICD1 |
2.850 |
4.250 |
4.750 |
| F |
ICF1 |
3.500 |
5.250 |
5.750 |
| G |
ICG1 |
4.000 |
6.000 |
6.500 |
| *T-304
S/S Channel change "1" to "2". T-316L
Channel change "1" to "6". |
Click here to
download a worksheet for Inverted Coil with Machined Retaining
Ring (pdf)
Or, click here for the On-Line
Worksheet
| External
Coil |
 |
| Channel
Section Size |
Section
Size |
(X)
Width
(inches) |
(Y)
Height
(inches) |
|
| A |
0.095 |
0.110 |
| B |
0.150 |
0.152 |
| C |
0.180 |
0.199 |
| D |
0.256 |
0.256 |
| F |
0.313 |
0.313 |
| G |
0.350 |
0.370 |
| K |
0.500 |
0.500 |
|
| MINIMUM
ID (inches) FOR EXTERNAL COILS |
| Section |
Product
Code* |
Galvanized
Channel |
Stainless
Channel |
Stainless
Filament |
| A |
ECA1 |
0.750 |
1.500 |
2.000 |
| B |
ECB1 |
1.000 |
2.000 |
2.000 |
| C |
ECC1 |
1.250 |
2.250 |
2.750 |
| D |
ECD1 |
1.500 |
2.500 |
3.000 |
| F |
ECF1 |
1.800 |
2.800 |
3.300 |
| G |
ECG1 |
2.000 |
3.000 |
3.500 |
| K |
ECK1 |
4.000 |
5.500 |
7.000 |
| *T-304
S/S Channel change "1" to "2". T-316L
Channel change "1" to "6". |
Click here
to download a worksheet for External Coils (pdf)
Or, click here for the On-Line Worksheet
|
| |
|
